5
EASY CLEAN SYSTEM
It is important to clean your mower after each
cut removing debris on the outside and
underside of your mower.
The easy clean system will help to keep the
underside of your mowing deck clean and free
of grass and dirt.
The mower is fitted with a male standard hose
quick fit connector, that is easily attached to
the majority of hose pipes.
1. Fit hose pipe to fitting.
2. Start mower
3. Turn hose pipe on.
As the water hits the spinning blade it
automatically cleans the blade, additionally the
water is thrown from the blade around the
underside of the deck cleaning it.
The paint may peel in certain areas due to the
abrasive action and moisture from the grass.
Use a rust proofing paint to protect these
areas from corrosion, this will extend the life of
your mower.
MAINTENANCE
Changing the oil
:- the oil drain plug is located
at the base of the engine. Remove the drain
plug and carefully empty the oil into a
container. Replace the drain plug and refill
with 0.6L SAE30 oil. To check the oil level
unscrew the filler cap which has an integral
dipstick, With the cap sat on the rim of the oil
filler (not with the cap screwed in) remove it ,
the oil should be between the min-max marks
on the dipstick.
MAINTENANCE cont…
Spark Plug
:-Once the engine is cool remove
the spark plug and clean with a wire brush.
Check the gap with feeler gauges and set the
gap to .75mm (0.030”) and replace-
DO NOT
over tighten.
Air Filter
:-unclip the air filter cover remove the
sponge element and replace.
Draining the Fuel Tank & Carburettor
:-
offset near the base of the carburettor is a
drain bolt. Using a suitable container remove
the drain bolt and funnel the fuel into the
container. This will drain the fuel from the
carburettor and the fuel tank.
MAINTAINING THE BATERY
It is recommended that if the mower is not to
be used for long periods of time the battery
should be disconnected and charged to
maintain battery level ready for use.
