Rhyas BGM4006, Original Instructions Manual

Page: 3 / 12

EN
3
WET & DRY BENCH GRINDER
Thank you for buying this Rhyas product.
By doing so you now have an excellent product,
delivered by one of Europes leading suppliers.
All products delivered to you by Rhyas are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the following text refer to the
drawing on page 2-4
Read the operating instructions carefully
before using this device. Familiarize
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Contents:
1. Machine data
2. Safety instructions
3. Installation
4. Operation
5. Maintenance
1. Machine data
Technical specification
Voltage 230 V~
Frequency 50 Hz
Power input 250 W S2=30 min.
No load speed 2950/min
Grinding stone dimensions Ø 150x20 (12.7) mm
Wet grinding stone dimensions Ø 200x40 (20) mm
Weight 8.5 kg
Lpa (sound pressure level) 62.6 +3 dB(A)
Lwa (acoustic power) 75.6 +3 db(A)
Vibration < 2.5 m/s
2
Load factor
A load factor of S2 = 30 min (intermittent
periodic duty) means that you may operate the
motor continuously at its nominal power level
for no longer than the time stipulated on the
specifications label (30 minutes ON period).
If you fail to observe this time limit the motor will
overheat. During the OFF period the motor will
cool again to its starting temperature.
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
• using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
• the times when the tool is switched off or when
it is running but not actually doing the job, may
signifi cantly reduce the exposure level
Protect yourself against the effects of
vibration by maintaining the tool and its
accessories, keeping your hands warm, and
organizing your work patterns.
Contents of packing
1 Wet & dry bench grinder
1 Sets eye shield b eye shield
1 Tool rest
1 Users manual
1 Guarantee card
Check the machine, loose parts and accessories
for transport damage.
Features
Fig. A
1. On/off switch
2. Support
3. Cover glass
4. Cover glass holder
5. Screw
6. Grinding stone wet
7. Water reservoir
2. Safety instructions
In this manual and/or on the machine the following
symbols are used:
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.