Page 6
6. Loosely fasten the
footplate to the
vertical support
brackets using
(2) M10 x 30 Hex
Head Bolts,
(4) Flat Washers
and (2) Nylock Nuts
(Bag #1).
7. Loosely fasten the rear seat
back brackets to the rear seat
back cushion (4) M6 x 25
Hex Head Bolts, (4) Lock
Washers and (4) Flat Washers
(black arrows, Bag #5).
8. Loosely fasten the seat back
assembly to the front of the
utility box using (4) M8 x 25
Hex Head Bolts and (4) Flat
Washers (red arrows, Bag #4).
NOTE: Hardware may be pre-
installed on box if not in Bag.
9. Tighten the hardware left loose
in Steps 7 and 8.
10. Place the seat
box assembly
on top of the
horizontal
support
brackets.
Loosely fasten
the box to the
brackets using
(4) M8 Flat
Washers and
(4) M8
Nylock Nuts
(Bag #4).
