Page 6
7. Loosely fasten the footplate to the vertical support bracket using (2) 10mm x 30
Hex Head Bolts, (4) Flat Washers and (2) Nylock Nuts (Bag #3).
8. Loosely fasten the longer leg of a
handrail to the rear most portion
of the seat platform (blue arrow)
using (1) 10mm x 40 Phillips
Head Truss Bolt, (1) Flat Washer
and (1) Nylock Nut (Bag 4).
9. Slide (1) footplate support
bracket over the long end of the
handrail until the holes align
(black arrow). The bracket will
cradle the footplate. Loosely
fasten the bracket and handrail
to the footplate using (1) 10mm
x 80 Hex Head Bolt, (2) Flat
Washers and (1) Nylock Nut
(Bag #4).
10. Repeat Steps 8 and 9 for the
opposite handrail.
11. Place the rear seat back support
frame between the handrails.
Loosely fasten the support frame
to the bottom of the handrails
and the seat platform (red arrow)
using (2) 10mm x 70 Hex Head
Bolts, (4) Flat Washers and (2)
Nylock Nuts (Bag #4)
