Caution: Please read through the instructions carefully. Before starting
this project, remove the system’s positive and negative connections
from the battery or battery pack. This kit is designed for a 12-30V
operation only. Operating this kit at a higher voltage will void any and
all warranties. Look behind each drill location BEFORE YOU DRILL.
Installer is responsible for damage (i.e. drilling into a wiring harness,
battery, fuel tank etc.). Do no attempt to activate or control this device
in a hazardous driving situation.
LGT-297 and LGT-298
Strobe Light Bar, 10-30V DC
Installation Instructions
LGT-297
LGT-298
