Page 4
7. Remove sweater basket. Discard hardware.
8. Remove access panel. Retain hardware.
9. Remove both seat back support brackets and
rubber boots. The brackets are attached to the
frame, under the body.
Utility Box Mounting Kit Installation
1. Slide a new boot around the bottom of each
of the utility box support frames.
2. Install the utility box support frames where
the original seat support brackets were
installed. Mount using the Original Hardware.
NOTE: The alignment pins on the support
frames will point upward towards the top of
the cart.
3. Reinstall the access panel using the Original
Hardware.
(Passenger Side)
(Passenger Side)
Summary of Contents for BOX-117
Page 8: ...Page 8...
