10
Manual calibration mode
The instrument calibration procedure is as follows:
To turn the instrument on press the POWER key. For two seconds
the display will show the following message:
Rhopoint
Novo-Shade Duo
The display will then indicate the current measurement mode of the
instrument.
Note: To switch between measurement modes see page 14.
After a further two seconds the instrument will revert to
measurement mode as seen below:
Use the SCROLL UP/DOWN key to select the following option:
Press the READ/SELECT key to start the procedure.
Press the READ/SELECT key to confirm your selection.
The display now reads:
Rhopoint
Shade Mode
Rhopoint
Opacity Mode
ANGLE Value No.
45/0 99.4 7
WHITE Value No.
45/0 99.4 7
TO CALIBRATE
Press Read Key
ARE YOU SURE?
Press Read Key
Calibrate
Sample Black Ref
Opacity mode
Shade mode