1.
Turn trailer body upside down and align the axle with the 7/16” threaded holes in the aluminum
power rails which are molded into the trailer body. Tighten securely using the 7/16 x 1” bolts
and lock washers.
2.
Slide wheels onto the axle stub as shown. Grease zerk should be on the inside. Next slide the ¾”
machine washer onto the axle stub and place the cotter pin thru the hole in the axle stub. Be
sure to bend cotter pin over to hold the wheel onto the axle.
Note: Grease before using.
Power rails.
Position axle over
the smaller
threaded holes in
the power rail.
Secure here with
the 7/16x1” bolts
and lock washers.
Grease zerk.
¾” machine washer.
Cotter pin
