background image

 

 

 

Rhino Xpress 20 Trailer Assembly Instructions

 

 

Tools Required: 

 

 

Ratchet 

Extension for ratchet 

9/16” socket 

9/16” wrench 

5/8” socket 

Pliers 

Hammer 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

990035 Tires 
18 x 8.5-8 

990034 Axle  

200583 Latch 
Bracket 

200659 
Tipper latch 

990038 Hdwe 
bag 

200666 Tongue pivot 

990037 Pin 
coupler 

200661 
Tongue 

3/8 x 1 
Bolt, 
washers, 
nylock nuts 

Cotter pins 

7/16 x 1 Bolt 
and lock 
washers 

3/8 Bolts and 
nylock nuts 

3/8 x 3” 

3/8 x 2 ¾” 

3/8 x 2 ½” 

3/4“ machine 
washers 

200791 Plastic 
Trailer Body 

Summary of Contents for Xpress 20

Page 1: ...ers Hammer 990035 Tires 18 x 8 5 8 990034 Axle 200583 Latch Bracket 200659 Tipper latch 990038 Hdwe bag 200666 Tongue pivot 990037 Pin coupler 200661 Tongue 3 8 x 1 Bolt washers nylock nuts Cotter pins 7 16 x 1 Bolt and lock washers 3 8 Bolts and nylock nuts 3 8 x 3 3 8 x 2 3 8 x 2 3 4 machine washers 200791 Plastic Trailer Body ...

Page 2: ...onto the axle stub as shown Grease zerk should be on the inside Next slide the machine washer onto the axle stub and place the cotter pin thru the hole in the axle stub Be sure to bend cotter pin over to hold the wheel onto the axle Note Grease before using Power rails Position axle over the smaller threaded holes in the power rail Secure here with the 7 16x1 bolts and lock washers Grease zerk mac...

Page 3: ... the nut enough to hold pivot securely yet allow it to freely move with no excess play 4 Attach tongue to the pivot using the 3 8 x 3 bolt and nylock nut Tighten the nut enough to hold tongue securely yet allow it to freely move with no excess play Both wheels installed Tongue pivot 3 8 x 3 bolt and nylock nut Attach tongue here with 3 8 x 3 bolt and nylock nut ...

Page 4: ...r latch in the slots so there is just enough room for the catch to clear the bracket Tighten securely once the proper mounting position is achieved 7 Insert pin coupler into the tongue and fasten securely with the 3 8 x 2 bolt and nylock nut It may be necessary to tap the pin coupler into place with a hammer 3 8 x 1 bolt attaches here 3 8 nylock nut and washer goes here on the inside of trailer bo...

Reviews: