RHINO TURBO 96, Operator'S Manual

Page: 102 / 202

ASSEMBLY
TURBO 96 01/11 Assembly Section 3-4
© 2011 Alamo Group Inc.
ASSEMBL
Y
TAILWHEEL ASSEMBLY - LIFT
1. Attach Bracket (3) into Support Beam (8) and
attach to Frame Assembly with Bolts (4) &
Locknuts (5).
2. Slide the Beam Weldment (2) through Bracket
(3) and Support Beam (8) and attach to Mower
Deck using Bolt (4) and Locknut (5).
3. Insert Tailwheel Beam (2) through Bracket (3)
and Support Beam (8). Install to Gearbox Lug
through pair of holes which will give
approximate desired cutting height using Bolt
(7) and Locknut (6).
TONGUE
Attach clevis weldment (3) to tongue weldment (1) using bolt (11), and locknut (12). Then attach tongue
weldment (1) to mower deck lugs with pin (6), bushing (8), and secure with locknut (9). Make sure that jack
mount tube (5) and (4) are attached to tongue and deck lugs. Attach parking jack (15) to mount tube (5) when
in storage and (4) when in operation or transport.
Note : Attach Safety Chain (27) to Tongue when in transport.
Figure Asm-R-0285.