CONFORMITY WITH DIRECTIVES
All models are CE marked to denote conformity with Directives 2014/35/EU
(Low Voltage) and 2014/30/EU (Electromagnetic Compatibility), as amended.
Standard 6095-1:2006/A2:2013
WARRANTY
This product is guaranteed under warranty and covers defects in material or
workmanship from 2 years of date of purchase. The original bill of purchase
(with purchase date) must be submitted.
The warranty will not apply in cases of misuse, by non-compliance of the
instructions; degradation from regular or incorrect use, e.g. overloading,
non-approved accessories, force or damage caused by external forces,
if the plug has been tampered with or removed, partially or completely
dismantled product, or interference by non-qualified persons.
ENVIRONMENTAL PROTECTION
Disposal
This symbol indicates that this product must not be placed in
general household waste. It should be sent to a separate recycling
facility for recovery, check local authorities for details.
By responsible recycling and separating this product from other
household waste it will help protect the environment and human
health, as the volume of waste sent to incinerators or land-fills will be reduced
and natural resources conserved.
• If your controller is connected to four EC fans and the fan connected to
OUT
1
port becomes disabled, the controller will beep and display error message
‘
E1
’ indicating the problem is on port
OUT 1
. Similarly, ‘
E2
’ will indicate
failure of the fan on port
OUT 2
, ‘
E3
’ will indicate failure of the fan on port
OUT 3
and ‘
E4
’ will indicate failure of the fan on port
OUT 4
. If multiple fans
will fail at the same time, multiple error messages will be displayed
in sequence.
• Error message, ‘
Er
’ indicates a connection problem with the thermal probe.
The controller cannot operate without a working thermal probe.
Rhino Ultra EC Controller
with Thermal Probe
Model: RFCEC001
Rhino Ultra EC Controller
with Thermal Probe
Model: RFCEC001
