RHINO RCA-2 Operation Instructions Manual Download Page 7

WARNING TO ALL ALARM

INSTALLERS

     The RCA alarm is equipped with Low

Current Negative Pulse Central Lock
outputs. This must not be used unless a
complete understanding of the car’s
central locking system is known. Failure
to do this can damage electronics and
this damage WILL NOT BE
COVERED UNDER WARRANTY! If
unsure, please connect relays as shown
on wiring instructions.

 

 

FOR “NEGATIVE TRIGGER” ORIGINAL POWER LOCK 

SYSTEM

 

          LOCK (ORANGE / BLACK FROM RCA)
                                                                                 TO EXISTING DOOR
                                                                                  RELAYS
          UNLOCK (PINK / YELLOW FROM RCA)

 

 

FOR “POSITIVE PULSE” POWER LOCK SYSTEM 

CONNECT OPTIONAL RELAYS AS SHOWN 

 

               LOCK (ORANGE/BLACK WIRE ON RCA)
                                                                                                 15A FUSE                 +12V

 (PINK YELLOW)            87                           87
             UNLOCK             87a                         87a
                                    86          85           86          85
                                          30                          30

 

LOCK OUTPUT

 

UNLOCK OUTPUT

 

 

TO INSTALL NEW DOOR LOCK MOTORS

  

 CONNECT OPTIONAL RELAYS AS SHOWN 

Summary of Contents for RCA-2









Reviews: