J. After all solvent is dried and the parts wiped down, apply a thin coat of grease inside both the top and bottom
of both tubes and to the upper and lower springs.
K. Insert the upper spring Part No. 610010 into the tubes and reassemble the upper bushings into the tubes.
L. Apply a liberal coat of grease to the keyways on each handle.
M. Reassemble the handles in the reverse order of disassembly.
Grease Specifications:
Open Gear and Fifth Wheel Grease, Color – Black,
Temperature Range – (-10° F to +400° F)
8.
When you store your post driver between jobs put extra oil in the air line and blow it into the unit. Slowly roll the
driver over to allow the oil to coat all inside surfaces, then stand the driver upright, to allow any condensation
to drain. If you store the driver for a prolonged period, it should be oiled every month or so depending on the
humidity.
9. Immediately replace any damaged or worn parts with new ones. If you think your driver, or any other Rhino prod-
uct or part is not performing properly, let Rhino or your Rhino dealer, distributor, or representative know. If you
don’t know what is wrong with your Rhino unit, you can send it, freight prepaid, to Rhino and we will examine it
free and let you know what is wrong, if it can be fixed and how much, if anything it will cost to repair it. This is a
Rhino service at no charge to you. Remember, freight must be prepaid and please call first so we are looking for
your unit. If there is nothing wrong with your unit or if your unit is repaired Rhino always replaces all bolts, lock
washers, and gaskets and there is a charge for those parts along with reassembly. Replace damaged warning
labels immediately. Call Rhino and we will send you a new label, no charge.
You have purchased a quality, rugged post driver and if you give your Rhino Model PD-39P Air Operated Panel
Post Driver reasonable care, it will give you efficient, trouble-free post driving.
If you have any questions, please let us know - we will be happy to help.
Rhino Tool Company • 620 Andrews Ave., PO Box 111 • Kewanee, IL 61443 • www.rhinotool.com • Tel: 309-853-5555 • Fax: 309-856-5905
Rhino Tool Company has a policy of continuous product improvement and reserves the right to change specifications, designs, or prices at any time without notice or incurring obligations for said changes.
and are registered trademarks of Rhino Tool Company.
© Copyright 2002 Rhino Tool Company
Printed in U.S.A.
Form 264 - 7/07
-4-
