![RHINO HO3608 Manual Download Page 10](http://html1.mh-extra.com/html/rhino/ho3608/ho3608_manual_1452407010.webp)
MAINTENANCE
Cleaning.
Please note:
Turn off and unplug the unit before cleaning or maintenance.
Clean the surface
Clean the housing with a duster or a soft wet cloth. Do not use a chemical solvent as this could
cause damage.
Air fi lter cleaning
1.1
Clean the air fi lters every 2 weeks. If the air fi lter is blocked with dust, the effi ciency will
reduce.
A. Pull out top and bottom fi lters as below pictures
B. Wash the air fi lters by immersing it gently into warm (about 40
°C
) water with a neutral
detergent, rinse it and dry it thoroughly in a shaded place.
C. Install air fi lters carefully after cleaning the fi lters
Open from here
Clean the air fi lter every 2 weeks. If the air fi lter is blocked with dust, the effi ciency will reduce.
1.
Outward and upward put out the air fi lter like picture 8 .
2.
Wash the air fi lter by immersing it gently into warm (40
°C
) water with a neutral detergent, rinse it
and dry it thoroughly in a shaded place.
3.
Replace the air fi lter to its original position in the unit.
Please note:
Carbon fi lter cloth (choose the accessories depending on your needs) can be
put out after putting out the fi lter frame and should be changed every 2-3 weeks based on the
environment.
After Season Maintenance
1.
Pull out the plug in drainage hole and empty the water plate , or drain out the water by leaning
the unit, then shift the unit mode to Fan mode, and press the button for 5 seconds on low fan
speed. Keep this mode for half day till the conduit is dried. Doing like this can keep the inner unit
dry and prevent mold.
2.
Turn off the unit and pull out the plug.
3
. Coil the wire and bind it together.
4.
Separate the air-exhausted pipe and keep it safe.
5.
Put the unit into a plastic bag, then keep it in a dry place.
6.
Take out the batteries of remote control and keep them safe.
Picture 8