RHINO FINISHING MOWERS GK6072, Operator'S Manual, Page: 71 / 98

Assembly Section 3-3
ASSEMBLY
GK6072 08/01
© 2004 Alamo Group Inc.
ASSEMBL
Y
1
2
8
3
4
7
5
9
A-FRAME ATTACHMENT (cont'd.)
Install floating hitch pins to main frame using either the standard or extended hitch postions. Exploded view shows
standard position
FIGURE 2 . To install in extended position move flats (1) forward and place bushings (2) in rear
holes and bushing (3) at center hole. FIGURE 3.
1
1
2
3
STANDARD POSITION EXTENDED POSITION
FIGURE 2
FIGURE 3
FIGURE 4
1
3
2
3 1
CASTER WHEEL ATTACHMENTS
Attach the right and left Axle Arm Weldment (5) to the deck with 3/8" bolts (3) flatwasher (1-1/2OD x 3/16 thick)
(7), and 3/8 locknuts (8). Install two one inch spacerS (1) and one 1/2 inch spacer (4) on each fork and wheel
assembly shaft (6). Insert fork shaft (9) into axle arm weldment (5). Install two additional one inch spacers (1)
on each axle shaft (9) and retain using Snapper Pin.
FIGURE 4.