Place the articule to be weighed on the balance.
The screen will show its weight.
This function allows you to weigh different things
consecutively without removing the object.
1
.
Place the first object on the scale, obtain the weighing
reading.
2.
Press the
[ON / OFF/ CERO]
button to delete screen
reading and show
"0"
before adding the next object.
NOTE:
When the weight on the scale is greater than 200 g,
"T"
will appear on the screen, indicating that the
"TARE"
function is activated.
Users may choose the weighing unit that they
require by pressing the
[MODE]
button until they
reach the desired unit of weight. The left corner
of the screen will show the different units of
weight.
The users can change from the unit weights of g to lb:
oz to fl’oz.
This is done while the scale is turned on, choose the
unit required by pressing the
[MODE]
button for 3
seconds until the desired unit is shown g to lb or ml to
fl’oz.
Press the
[ON / OFF]
button to turn on the scale.
To turn of the scale press the
[ON / OFF]
button for 3
seconds.
Wait until the screen on the balance reads
“0”
and indicates
the unit of measurement.
ZERO FUNCTION
ADJUSTING THE WEIGHING MODE INDICATOR
UNIT CONVERSION
4
Weight mode
Water volume mode
Milk volume mode
ml
ml
Weight unit
lb:oz
Volume unit
fl’oz
ml
The balance turn-off if the screen shows "0" or hold on the
same weights for 2 minutes.
1.
2.
1.
2.
3.
WEIGHING FUNCTION
Place the scale on a hard flat and solid surface.
TURNING ON / OFF AND AUTOMATIC OFF SWITCH