RHINO 070012 Owner'S Manual Download Page 4

INTRODUCTION

Congratulations on your selection of the Rhino

®

 PD-45 or 

PD-55 post driver. We are certain that you will be pleased with 

your purchase. Rhino

®

 Air Operated Post Drivers are built with 

extremely high quality components. From the cast body to the 

piston, each component and alloy steel accessory for the drivers 

are first quality and when operated and stored properly will 

serve you for years. See the chart to the right for post driving 

applications these drivers are suited for.
We suggest you read the warranty information fully and 

understand its coverage and your responsibilities of ownership. 

To receive a warranty extension on the driver components, log on 

to http://rhinotool.com/contact-support/warranty-information/ and 

fill out the owner’s registration.

When your Rhino

®

 post driver needs scheduled maintenance, the 

technical service staff here at Rhino Tool Company is standing 

by to assist you. Our fully trained staff can walk you through the 

process of inspecting and maintaining your post driver if you 

experience difficulty. Again, congratulations on your selection and 

from the dedicated team here at Rhino Tool Company, THANK 

YOU for choosing a genuine Rhino

®

 post driver.

Kindest Regards, 

The Rhino Tool Team

iii

Model

PD-45

PD-55

Duty

Medium

Medium

Air Consumption CFM@90 psi (6.21 BAR)

30 (0.85m

3

/min)

42 (1.19m

3

/min)

Wt. lb (kg)

46.3 (311)

54.6 (24.8)

Master Chuck inches (mm)

3” ID (76.2)

3-7/8” ID (98.4)

Applications inches (mm)

Fiberglass T Posts

X

X

3/4" (19) to 1" (25.4) Ground Rod

X

X

3/4" (19) to 1-1/2" (38) 

Reinforcing Bar Tent Stakes

X

X

1" (25.4) Concrete Form Pins

X

X

1” (25.4)  Pipe

X

X

1-1/4" (31.75) to 1-1/2" (38) Pipe

X

X

1-5/8" (40.6) Pipe

X

X

2" (50.8) Pipe

X

X

2-1/2” (63.5)

X

X

3" (76.1) Pipe

X

T Posts

X

X

Telespar Posts

X

Telespar Post Breakaway Bases 

*

X

1.2 to 1.5 lbs/ft Channel Posts

X

X

2 to 2.75 lbs/ft Channel Posts

X

3 to 4 lbs/ft Channel Posts

X

Channel Post Breakaway Bases 

*

X

C Posts

X

Rectangular Posts

X

X

To drive these type of posts close to the ground you will need to order a special driving cap or adaptor. 

Contact your Rhino servicing dealer for information.

Summary of Contents for 070012





















Reviews: