background image

Assembly Instructions

 

Shed House Style 12 x 12 x 8  

V2.2

1

ASSEMBLY INSTRUCTIONS  

SHED STYLE 12Wx12Lx8H 

Congratulations! 

Congratulations on your purchase of a Shed Style 
Instant Shelter by MDM Products LLC.  With proper 
installation, use, and maintenance, your new unit will 
provide many years of good and suitable service.  Your 
new Rhino Shelter portable enclosure is a combination 
of excellent engineering and well thought out design.  
The unit is comprised of a rigid tubular frame, covered 
with a long life polyethylene cover and double access 
ends.   

The multiple part tubular frame assembly is pre-drilled 
for easy insertion of hardware to assemble.  The tubing 
is made from high-grade galvanized steel tubing, to 
resist moisture and oxidation over the life of the shelter.  
The fabric components are made from ASTM-5 
approved polyethylene materials.  The cover is also UV 
protected for continual exposure to the sunlight. 

It is suggested that you read the assembly instructions 
completely before you begin.  This will help attain the 
best results for your installation the first time.   

SAFETY WARNING 

The installation of this unit must conform to the 

requirements of all authorities having jurisdiction in 

your specific local area.  In the absence of such 

requirements, the installation must conform to the 

provided assembly and installation instructions.  

MDM Products LLC will not be responsible for failure 

to comply with any requirements in a given local 

area.  Consequential damages or injuries caused by 

improper installation, alteration, or improper use are 

strictly that of the user.  Unit MUST be cleared of All 

Snow Accumulation immediately to avoid overload.  

Unit is not to be used for occupancy for any length 

of time.  No running internal combustion engines, 

open flames, or contact with heated surfaces are 

allowed. 

 Cartons should be inspected upon delivery from 
carrier, and any evident damages should be noted on 
the bill of lading before signing.  If upon opening the 
cartons hidden damage is noted, contact carrier or its 
agent immediately.  Claims for shipping damage MUST 
be made with the shipping company.  An inspection of 
the goods will most likely be required.  Do not discard 

packing or any components before the freight company’s 
inspection.  All claims for freight damage must be made 
with 15 days of receipt of the goods in accordance with 
ICC regulations. 

ASSEMBLY PROCEDURE 

The proper sequence and steps to install this unit will 
produce a proper and good installation.  Failure to read 
and follow these guidelines may result in an improper 
installation and will void all warranty and protection the 
owner is entitled to with the product.  The steps to be 
undertaken are: 

1.

Perform an inventory check before beginning to be
certain all components are available for installation.

2.

Prepare location and place both unit boxes near
location sight.

3.

Assemble four (4) arches of unit

4.

Assemble unit end arch, first interior arch, and wind
braces with first top ridge, base cross rail, and side
cross rail sections.

5.

Add additional arch assemblies with each section of
top ridge rail, base cross rails and side cross rails.

6.

Place frame into desired position and 

level

 frame

both end-to-end and side-to-side.  Measure interior
of frame feet across opposite corners and square as
needed.

7.

Anchor frame assembly to ground with provided
anchors, u-bolts and drive rod provided.

8.

Install two(2) doors on both ends of frame assembly.

9.

Install main cover over frame assembly.

TOOLS REQUIRED 

The following hand tools are suggested for proper 
installation of your new Rhino Shelter unit: 

9/16” Open End Wrench 

9/16” Socket or Box Wrench 

Large Flat Tip Screwdriver 

Maul or Sledgehammer 

2-foot Level

6-Foot Step Ladder

INVENTORY CHECK 

Start installation procedure by removing all components 
from packaging and ensure all components are present 

Qty

Part Number 

Description 

MUC-8000 

Main Unit Cover 

DZD-5002 

End Panel Door with Zippers

DZD-5003 

End Panel with Zippered 
Manway Door 

Summary of Contents for SH121208HGN









Reviews: