RSF Rhino Sportz - Fixed Mount
Place these instructions in the vehicle’s glove box after installation is complete.
Important:
Please read these instructions carefully prior to installation.
Please refer to your fi tting instruction to ensure that the roof racks are installed in the
correct
locations.
Check the contents of kit before commencing fi tment and report any discrepancies.
Tools Required:
Measuring tape
Marking pen
5mm Drill bit
Power or cordless drill
Drill stop
Vacuum cleaner
Masking tape
Phillips head screwdriver
Galvanised paint
Selleys Butyl Mastic
Stanley knife
Pneumatic or concertina type rivet gun
Centre punch
Rubber mallet
Security type allen key, provided in kit
Parts List
2
Item Component Name
Qty. Part No.
1
Sportz Rubber Buffer
2 -
2
Sportz Crossbar
2 -
3
10G x 1/2” Self Tapping Screw
4 B045
4
M6 x 20mm Button Head Security Screw 4
B062
5
M6 Spring Washer
4 W004
6
M6 x 12.5mm Flat Washer
4
W003
7A
Sportz Track Leg Left
2 M013
7B
Sportz Track Leg Right
2 M014
8
Rivet
16 H008
9A
Sportz Fixed Mount Pad Left
2 M029
9B
Sportz Fixed Mount Pad Right
2 M028
10
M6 x 21.43mm x 4.4mm Brass Hex Nut 4
N009
11
PVC Foam Gasket
4
C135
12
5mm Security Allen Key
1
H011 & H013
13
Fitting Instruction
1 RS67
7A & B
5
4
9A & B
8
6
Care Instruction:
Wash vehicle roof prior to installation.
Layout
1
Install nuts, apply gasket as shown. With stanley knife,
carefully trim gasket.
2
Locate legs into crossbar, use rubber mallet if required.
Install screw, cross bar rubber and attach base as
shown.
1
11
12
3
10
FRONT
Page 1 of 3
