3
Fit First Corner Moulding to End Rail
Take one of the end rail extrusions (short extrusion) and slide a corner moulding into one end and fasten in place
with screw (provided in kit).
Corner Moulding
End Rail Extrusion
1
Fit Hardware to Mouldings
Loosely fit hardware to the mouldings as shown below, leaving the hardware off half of the end supports. End
supports are marked underneath with M513.
Be sure to set the bolts so they locate half way through the channel nut (see image A below).
2
Fit Cover to Corner Mouldings
Fit the corner moulding cover as shown and fasten in place with screws provided in kit. Repeat this process for all
corner mouldings.
Corner Moulding
Cover
Screw
Corner Moulding
Screw
M8 x 20 Hex Bolt
M8 Spring Washer
M8 x 30 Flat Washer
M8 Channel Nut
M8 x 20 Hex Bolt
M8 Spring Washer
M8 x 30 Flat Washer
M8 Channel Nut
End Moulding
Rail Support
Make sure bolt locates half
way through channel nut.
A
Page 1 of 6
Rhino Pioneer Full Rail Kit
