RHINO METALS Longhorn LSB1014, Owner'S Manual

Page: 14 / 24

KEY LOCK OPERATING INSTRUCTIONS (LSB1014 ONLY)
Getting Started
To Unlock:
1. Push key into keyway, double bitted key can go in either way.
Note: Spring loaded keyway may require more force to insert key all the way.
1. Rotate key clockwise until it stops.
2. Open door using the handle formed into the door.
Note: Key is not removable while in unlocked position.
To Lock:
1. Close door.
2. Rotate key counter - clockwise until it stops.
3. Remove key.
Note: Keyway is spring loaded to help prevent lock picking so key may be pushed
out automatically once locked
Rhino Metals Technical Support (208) 454 - 5545
If keys are lost, replacement keys are available for $50 with a 35 day lead time.
Otherwise, the lock must be replaced.
14
REMOVING SHIPPING FEET
It is recommended to use a minimum of 2 people for assistance during this
process.
Longhorn LSB2418 (if equipped)
1. For safety purposes, place two rectangular blocks (one on
the left and another on the right) underneath the safe.
These blocks should be long enough to span from the
front to the back of the safe.
2. Open safe door and remove the black anchor hole plugs
located on the safe interior floor (see Picture 1).
3. Using a 19mm socket wrench, remove bolts from anchor
holes by turning bolts counter
- clockwise. Replace black caps on all exposed
holes. Close and lock the safe door before proceeding to next step.
4. From the top right side of the safe, push up slightly towards the opposite side of
the safe. Carefully pull shipping foot and rectangular block away from
underneath the tipped up side of the safe (see Picture 2).
5. Once shipping foot and block has been removed from one side of the safe,
carefully lower the safe to the floor (see Picture 3)
6. Repeat steps 3 - 5 for removal of other shipping foot.
Picture 1
PULL UP
Carefully pull shipping
foot and block from
underneath the safe.
Carefully lower
the safe to floor.
Picture 2
Picture 3