Rheem Warrior Series AP10414-9 Use And Care Manual Download Page 1 | Manualshive

Page: 1 / 20

Rheem Warrior Series AP10414-9 Use And Care Manual Download Page 1

Water Heaters

Electric

For Manufactured Housing (Mobile Home)

The purpose of this manual is twofold: one,
to provide the installer with the basic
directions and recommendations for the
proper installation and adjustment of the
water heater; and two, for the
owner–operator, to explain the features,
operation, safety precautions, maintenance
and troubleshooting of the water heater.
This manual also includes a parts list.

It is imperative that all persons who are
expected to install, operate or adjust this
water heater read the instructions carefully
so they may understand how to perform
these operations. If you do not understand
these instructions or any terms within it,
seek professional advice.

Any questions regarding the operation,
maintenance, service or warranty of this
water heater should be directed to the seller
from whom it was purchased. If additional
information is required, refer to the section
on “If you need service.”

Do not destroy this manual. Please read
carefully and keep in a safe place for
future reference.

Recognize this symbol as an
indication of Important Safety
Information!

California Proposition 65 Warning:

This product contains chemicals known
to the State of California to cause
cancer, birth defects or other
reproductive harm.

!

!

Single and Double

Element Models

Side or Top

Water Connections

Residential 20–52 Gallon

®

LISTED

786H

Printed in USA

Use & Care Manual

With Installation Instructions for the Installer

AP10414-9 (11/03)

1
2
3
...
»

Summary of Contents for Warrior Series AP10414-9





















Reviews:

No comments