31
12. Remove the motor assembly from the air handler.
14.7 SMALL CABINET BLOWER ASSEMBLY REMOVAL PROCEDURE
14.7
(RHAL-FR18, RHAL-FR24, AND RHBL-FR24)
1. Disconnect all power to the air handler.
2. Disconnect all blower motor leads from the control board, capacitor, and speed tap.
Reference wiring diagram for more detail.
3. If equipped with a heater kit, remove the 3 screws which attach the breaker/terminal
block assembly to the blower shelf. This will help gain access to the screws in step
6. (1/4” Socket)
4. Remove capacitor to help prevent damage to the coil. (1/4” Socket)
5. Install an 18” x 20” piece of cardboard over the coil as illustrated below to help pro-
tect the coil from damage.
Remove Screws
Remove
Capacitor
Install Cardboard
