Rheem Commercial Point-of-Use Electric Water Heater Use & Care Manual Download Page 1

WITH INSTALLATION INSTRUCTIONS FOR THE CONTRACTOR

Commercial Point-of-Use Electric Water Heater

USE & CARE MANUAL

®

LISTED

786H

AP12129-4 (01/05)

Printed in USA

The purpose of this manual is twofold: one, for

the installing contractor, to provide requirements
and recommendations for the proper installation
and adjustment of the water heater; and two, for
the owner-operator, to explain the features, op-
eration, safety precautions, maintenance and
trouble shooting of the water heater. This man-
ual also includes replacement parts information.

It is imperative that all persons who are expect-

ed to install, operate or adjust this water heater
read the instructions carefully so that they may
understand how to do so.

NOTICE: This water heater is designed for use in a commercial application and the installation and maintenance of it
should be performed by qualified, licensed service personnel. If the foregoing assumption is not appropriate, then we
recommend that you obtain and retain our Residential Use & Care Manual.

CALIFORNIA PROPOSITION 65 WARNING: This product contains chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm.

Do Not Destroy this Manual. Please read carefully and
keep in a safe place for Future Reference.

Recognize this symbol as an Indication of Important
Safety Information!

!

!

!

!

Summary of Contents for Commercial Point-of-Use Electric Water Heater













Reviews: