INSTALLATION – CONTROLLERS
73
BATHROOM 1 AND BATHROOM 2 CONTROLLERS
If only one Bathroom controller is to be installed, the standard Bathroom 1 Controller (Rheem AU - Part 299854,
NZ - Part A299851) or the Bathroom 1 Deluxe controller (Rheem AU - Part 299862, NZ - Part A299862) must
be used. If two Bathroom controllers are to be installed, one must be a standard Bathroom 1 controller and the
other must be a standard Bathroom 2 controller (Rheem AU - Part 299855, NZ - Part A299852) or one must
be a Bathroom 1 Deluxe controller and the other must be a Bathroom 2 Deluxe controller (Rheem
AU - Part 299863, NZ - Part A299863).
They have a minimum temperature setting of 37°C and a maximum temperature setting of:
874 series
50°C
876 series
50°C
The method of installation for the standard Bathroom 1 and Bathroom 2 controllers and the Bathroom 1 Deluxe
and Bathroom 2 Deluxe controllers is identical.
Choose a suitable location for each Bathroom controller, away from water, heat, and sunlight. The Bathroom
controllers are supplied with a 250 mm length of wire with connectors to mate with the Bathroom controller
cable.
Notes:
It is not recommended to have exposed wiring in a bathroom.
Do not apply sealant to the controller cable.
Bathroom 1 and Bathroom 2 Controller Components
Bathroom 1 Deluxe and Bathroom 2 Deluxe Controller Components
screw x 2
controller screw
base plate
foam packing
Bathroom controller (standard)
screw x 2
controller screw
base plate
foam packing
Bathroom Deluxe controller