H E X A G O N A L C R Y S T A L C O L U M N F L O O R L A M P
I M P O R T A N T S A F E T Y I N S T R U C T I O N S
INSTALLATION BY A LICENSED ELECTRICIAN IS STRONGLY
RECOMMENDED.
This fixture has been rated for up to two (2) 100-watt maximum
Type A standard candelabra lightbulbs, two (2) 23-watt compact
fluorescent lightbulbs, two (2) 12-watt LED lightbulbs or two (2)
8.8-watt LED lightbulbs. To avoid the risk of fire, do not exceed the
recommended wattage.
W A R N I N G S
All wires are connected. When unpacking, be careful not to pull
wires, as a bad connection may result. Do not connect electricity
until your fixture is fully assembled. To reduce the risk of fire,
electrical shock, or personal injury, always turn off fixture and allow it
to cool prior to replacing the lightbulb. Do not touch or look directly
at the bulb when fixture is illuminated. Keep flammable materials
away from lit bulb.
W A R N I N G : This product can expose you to lead, which is
known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
T H I S P R O D U C T I S N O T A T O Y A N D H A S N O
P L A Y V A L U E .
W A R N I N G : S T R A N G U L A T I O N H A Z A R D
Keep cord at least 3 feet away from cribs, bassinets, and toddler
beds. Keep out of reach of children under 3 years of age.
A S S E M B L Y & I N S T A L L A T I O N
1. Carefully remove all parts from the box and remove all plastic
coverings.
2. Place Lamp Body (F) on a flat surface.
3. Screw Riser (C) to the top of Lamp Body (F).
4. Remove Finial (A) from Riser (C).
5. Place Shade (B) (not included) to the affixed Riser (C) and
secure with Finial (A).
6. Insert Bulbs(E) into each of Sockets(D).
7. Remove the red protective plug cover from the cord with plug.
8. Plug into proper electrical outlet and test fixture.
9. Assembly is complete.
C A R E I N S T R U C T I O N S
Do not use polishes or cleaners on the fixture. Wipe clean with a
soft, dry cloth.