C A D E D O U B L E B AT H S C O N C E
Wipe clean with a soft, dry cloth or static duster. Always avoid the use of
harsh chemicals or abrasive cleaners, as they may cause damage to the
fixture’s finish.
ASSEMBLY INSTRUC TIONS CONT.
HORIZONTAL MOUNTING: FIG. B
CARE INSTRUC TIONS:
1. Remove all parts carefully from the box and remove all plastic
coverings.
2. Remove glass shades (A) by unscrewing from threaded socket
cover (B).
3. Remove backplate screws (C) from backplate (D).
4. Carefully position adapter plate (G) behind mounting plate (F) and
guide wires from fixture through hole (M) located in the middle of
mounting plate (F) and hole (K), located in the middle of adapter plate
(G).
5. Make proper electrical connection with wiring exiting hole of adapter
plate (G).
6. Connect ground wire (green) from the fixture to the ground wire in
outlet box. Connect the black wires of the fixture (or smooth side of
the wire) to the black wire in the outlet box using wire nuts (H).
Connect the white wires of the fixture (or rough side of the wire) to
the white wire in the outlet box using wire nuts (H).
7. Affix mounting plate (F) and adapter plate (G) to “J BOX” by inserting
mounting plate screw (I) into slotted hole on bottom of mounting
plate (F) and slotted hole on bottom of adapter plate (G). Thread
screw (I) into bottom hole of “J BOX.”
8. Position mounting plate (F) and adapter plate (G) horizontally over
“J BOX”. Affix mounting plate (F) and adapter plate (G) to drywall on
right and left sides of “J BOX” by inserting mounting plate screws (E)
and (I) into slotted holes on right and left side of mounting plate
(F) and adapter plate (G). Make sure to use threaded plastic sleeve
(included) with mounting plate screws (E) and (I) when attaching
fixture to drywall.
9. Align holes in top and bottom of backplate (D) with screw holes in
top and bottom of mounting plate (F).
10. Place backplate (D) over mounting plate (F). Thread backplate
screws (C) into backplate (D) to secure fixture to mounting plate (F).
11. Align threaded section of glass shades (A) with threaded openings
of socket cover (B). Thread glass shades (A) onto threaded socket
cover (B) until tight.
3 of 3
