Fig.2
Fig.1
2
3
4
C1
C2
FIGURE 1
FIGURE 2
A
L A G U N A T W I N S T U D Y L O F T B E D - A S S E M B L Y I N S T R U C T I O N S
IMPORTANT
These bed parts can be cumbersome and heavy. Two people are therefore recommended for assembly to prevent personal injury and ensure the bed
parts are not damaged during the assembly process.
ASSEMBLY INSTRUCTIONS
1. Place the headboard (A) upright in the position you wish the bed to be in when fully assembled. Secure the threaded rod (1) to the fixed nut in the
headboard (A) by turning it manually. Raise the side rail (C1) up and place the rod (1) to align with the bore holes on the end of the side rail (C1). Put
the side rail (C1) up against the headboard (A) so the threaded rods go through the bore holes. Insert curved washer (2) and lock washer (3), place
hex nuts (4) on threaded rod (1) and tighten hex nuts (4) with wrench (5). See FIGURE 1.
KEEP HOLDING THE SIDE RAIL DURING NEXT STEP
.
2. Insert allen bolt (6) through the lock washer (7), flat washer (8) and hole in the heaboard as illustrated in FIGURE 2.
3. Repeat the above procedure with the other side rail (C2) to attach it to the headboard (A).
KEEP HOLDING THE SIDE RAIL DURING NEXT STEP
.
4 7
/
