5. Place the Bed assembled upright in the position you wish the bed to be in when fully assembled.
6. For packing purpose the center leg of bed slat 2 (E) was removed. Re-install the center leg (F) to the bed slat 2 (E) by turning manual
clockwise direction. DO NOT OVER TIGHTEN. See FIGURE 2.
7. Set the Bed slat 1 (D) and Bed slat 2 with center leg installed into the cavities on the slat holder rails of the side rails (B). Once the slats are
set, secure this with screws (6) provided, as illustrated in FIGURE 3. Check the center leg leveling, if it does not seat level, adjust the
leveler on the bottom of the leg, as per illustrated in FIGURE 4.
8. Set the platform panel (G) on the bed slat and then use screw (6) to fixed it with bed slat. See FIGURE 5.
9. Assembly is complete.
CARE INSTRUCTIONS
1.
Dust often using a clean, soft, dry and lint-free cloth.
2.
Blot spills immediately and wipe with a clean, damp, cloth.
3.
We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.
IMPORTANT SAFETY INSTRUCTIONS
1.
Please read all instructions carefully before assembling.
2.
For your safety, assembly by two or more adults is strongly recommended.
3.
Keep instructions for future use.
4.
Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural integrity of the item.
FIGURE 2
Fig. 3
Fig. 4
Fig. 2
Fig. 5
FIGURE 4
Leveler
FIGURE 3
FIGURE 5
E
L A G U N A F U L L / Q U E E N P L A T F O R M B E D
Page 2 of 2
