PARTS INCLUDED
A [1] HEADBOARD & FOOTBOARD
B [2] SIDE RAILS
C [2] BOTTOM SIDE RAIL
D [2] BED SLATS 1
E [1] BED SLAT 2
F [1] CENTER LEG
G [2] PLATFORM PANEL
NO.
ITEM
DESCRIPTION
QTY.
1
2
3
4
5
12 pcs.
Plain Washer
6
42 pcs.
Phillip Screw
Threaded Rod
12 pcs.
Lock Washer
Wrench
1 pc.
Hex Nut
8 pcs.
12 pcs.
FIGURE 1-A
ASSEMBLY INSTRUCTIONS:
1. Lay the Headboard (A) upside down on a scratch free surface.
2. Secure the threaded rod (1) to the fixed nut in the headboard (A) by simply turning it
manually.
3. Raise the side rail (B) up and place the rod (1) to align with the bore holes on the end of the
side rail (B), Bottom side rail (C). Put the side rail (B), Bottom side rail (C) up against the
headboard (A) so the threaded rods (1) go through the bore holes. Insert plain washer (2),
lock washer (3) and place hexagon nuts (4) on threaded rod (1) then tighten the hex nuts (4)
with wrench (5), as illustrated in FIGURE 1A & 1B.
4. Repeat the above procedure with the other side rail (B), bottom side rail (C) to attach it to
the headboard (A), and then repeat to connect side rails (B) to the footboard (A).
FIGURE 1-B
Fig. 1-B
Fig. 1-A
L A G U N A F U L L / Q U E E N P L A T F O R M B E D
Page 1 of 2
