RH Teen KIERAN STUDY BUNK 0288-12 Assembly Instruction Manual Download Page 2

Page 2 of 11

I M P O R T A N T   S A F E T Y   I N F O R M A T I O N   F O R   B U N K   B E D

-

TO HELP PREVENT SERIOUS OR FATAL 
INJURIES FROM ENTRAPMENT OR FALLS
1. Never allow a child under 6 years on upper bunk.
2. Use only mattress, which is 74"-75" long and
     37 1/2"-38 1/2" wide (TWIN BUNK) or 74"-75" 
     long and 53 1/2"-54 1/2" wide (FULL BUNK)
     on upper bunk.
3. Ensure thickness of mattress does not exceed 6"
     and mattress surface is at least 5 inches below 
     upper edge of guardrails.
4. Use guardrails on both sides of upper bunk.
5. Prohibit horseplay on or under bed(s).
6. Prohibit more than one person on upper bunk.
7. Use ladder for entering and leaving upper bunk.
8. If the bunk bed will be placed next to a wall the
     guardrails that run the full length of the bed 
     should be placed against the wall to prevent 
     entrapment between the bed and the wall.

STRANGULATION HAZARD 
9. Never attach or hang items to any part of the 
     bunk bed that are not designed for use with the 
     bed, for example, but not limited to hooks, belts,
     and jump ropes.

                      DO NOT REMOVE THIS LABEL

1.   Follow the information on the WARNINGS appearing on the upper bunk end structure and on the 
      carton.

 DO NOT REMOVE WARNING LABEL FROM BED.

2.  Always use the specified size mattress or mattress support, or both to help prevent the likelihood of 
      entrapment or falls.
3.  Surface of mattress must be at least 5 inches below the upper edge of guardrails on top bunk. 
4.  Do not allow children under 6 years of age to use the upper bunk. 
5.  Prohibit more than one person on upper bunk. 
6.  Periodically check and ensure that the guardrails, ladder, and other components are in their proper
      position, free from damage, and that all connectors are tight.
7.  Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8.  Always use the ladder for entering and leaving the upper bunk.
9.  Do not use substitute parts. Contact Restoration Hardware for replacement parts 
10. Use of a night light may provide added safety precaution for a child using the upper bunk. 
11.  Use guardrails on both sides of the upper bunk.
12. If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed 
       should be placed against the wall to prevent entrapment between the bed and the wall.
13. The use of water flotation  mattresses is prohibited.
14. 

STRANGULATION HAZARD

 - Never attach or hang items to any part of the bunk bed that are

       not designed for use with the bed: for example, but not limited to, hooks, belts, and jump ropes.
15. Keep these instructions for future reference.

WARNING

Model No: 0288 - 12/ 13

KIERAN STUDY BUNK BED TWIN/ FULL 

Summary of Contents for KIERAN STUDY BUNK 0288-12












Reviews: