FIGURE 3
4.
Raise the headboard and footboard (A) up and place the rod (1) to align with the bore holes on the end of the small side rails (C). Put the side
rails (C) up against the headboard and footboard (A) so the threaded rods go through the bore holes. Insert curved washer (2), lock washer
(3) then place hexa nuts (4) on threaded rod (1) and tighten hex nuts (4) with wrench (5), as illustrated in FIGURE 3.
4
3
2
5
5.
NOTE:
KEEP HOLDING THIS HEADBOARD AND FOOTBOARD DURING ASSEMBLY THIS STEP. RECOMMEND THREE ADULT MAN TO
EASY ASSEMBLY.
Bring the big side rail near the bed frame assembled above step. Gently lift up the headboard and footboard. Hook the metal bracket
pre-installed on the headboard and footboard to the slots with metal pin inserted on the big side rail. See FIGURE 4.
FIGURE 4
C
J U L I E T D A Y B E D T W I N B E D
Page 2 of 3
