J U L I E T D A Y B E D T W I N B E D
NO.
ITEM
DESCRIPTION
QTY.
1
Threaded Rod
4 pcs.
2
Curved Washer
4 pcs.
3
Lock Washer
4 pcs.
4
5
Wrench
1 pc.
Hex Nut
4 pcs.
PARTS INCLUDED
A [2] HEADBOARD & FOOTBOARD
B [1] SIDE RAIL (BIG)
C [1] SIDE RAIL (SMALL)
D [3] BED SLATS
E [4] LEGS
F [2] PLATFORM PANEL
1
A
A
FIGURE 1
FIGURE 2
Fig.1
Fig.2
Fig.2
Fig.2
30 pcs.
Philip round head
Screw
6
B
ASSEMBLY INSTRUCTIONS
1.
Gently lay the Headboard and footboard (A) on a flat and non-abrasive surface. Note:
There are holes at the bottom of the headboard and footboard (A) with pre-installed nuts
that correspond to the threaded rods pre-installed in the leg (E).
2.
Align and insert the threaded rod to the headboard and footboard (A) into the hole with
pre-installed insert nut then turn it clockwise direction to tighten, as illustrated in FIGURE 1.
3.
Gently lay the big side rail (B) on a flat and non-abrasive surface. Align and insert the
thread rod of the legs (E) to the headboard, footboard and big side rail. See FIGURE 2.
Page 1 of 3
