CALLUM 6-DRAWER TWIN/FULL STORAGE CANOPY BED
Page 8 of 10
STEP 14:
This final procedure should be done by two people working
together to carefully lift assembled canopy and place on top
of bed posts. Insert the Flat Washer (2), Spring Washer (3),
and Long Bolt (1) into the holes of Short Canopy Rails (J).
Tighten with Allen Key (6).
1
3
2
6
ASSEMBLY ALERT
- MENDING PLATES SHOULD ONLY BE ATTACHED WHEN BED IS DELIVERED AND ASSEMBLED IN HOME.
THEY SHOULD NOT BE ATTACHED DURING PRE-INSPECTION BY DELIVERY AGENTS.
- PLEASE USE A LADDER WHILE ASSEMBLING THE CANOPY AND METAL BRACKETS.
- MAKE SURE THE LADDER IS STABLE AND SAFE BEFORE YOU CLIMB UP/DOWN.
- BE CAREFUL WHEN TIGHTENING THE SCREWS SO THE WOOD DOES NOT CRACK OR SPLINTER.
- PLEASE MAKE SURE THE METAL BRACKET IS NO LESS THAN 4MM FROM THE EDGE.
