RH Teen BABY AVALON BUNK BED TWIN OVER TWIN STORAGE Instructions Manual Download Page 2

IMPORTANT SAFETY INFORMATION FOR BUNK BED

    

    WARNING

Page  2  of  10

1. Follow the information on the WARNINGS appearing on the

upper bunk end structure and on the carton.

2. Always use the specified size mattress, mattress support, or

both to help prevent the likelihood of entrapment or falls.

3. Surface of mattress must be at least 5 inches below the

upper edge of guardrails on top bunk.

4. Do not allow children under 6 years of age to use the upper

bunk.

5. Prohibit more than one person on upper bunk.

6. Periodically check and ensure that the guardrails, ladder,

and other components are in their proper position, free from

damage, and that all connectors are tight.

7. Do not allow horseplay on or under the bed and prohibit

jumping on the bed.

8. Always use the ladder for entering and leaving the upper

bunk.

9. Do not use substitute parts. Contact Restoration Hardware

for replacement parts.

10.Use of a night light may provide added safety precaution for

a child using the upper bunk.

11.Use guardrails on both sides of the upper bunk.

12.If the bunk bed will be placed next to a wall, the guardrail

that runs the full length of the bed should be placed against

the wall to prevent entrapment between the bed and the

wall.

13. The use of water flotation mattress is prohibited.

14. STRANGULATION HAZARD - Never attach or hang items

to any part of the bunk bed that are not designed for use

with the bed: for example, but not limited to, hooks, belts,

and jump ropes

15.Keep these instructions for future reference.

To help prevent serious or fatal injuries from entrapment of

falls:

·

Never allow a child under 6 years on upper bunk.

·

Use only mattress which is 74"-75" long and 37 

1
2

"-38 

1
2

"

wide on upper bunk.

·

Ensure thickness of mattress does not exceed 6" and

mattress is at least 5" below upper edge of guardrails.

·

Use guardrails on both sides of upper bunk.

·

Prohibit horseplay on or under bed(s).

·

Prohibit more than one person on upper bunk.

·

Use ladder for entering and leaving upper bunk.

·

STRANGULATION HAZARD  - Never attach or hang

items to any part of the bunk bed that are not designed

for use with the bed; for example, but not limited to,

hooks, bells, and jump ropes.

DO NOT REMOVE THIS LABEL

Summary of Contents for BABY AVALON BUNK BED TWIN OVER TWIN STORAGE











Reviews: