RH Teen 355-80 Assembly Instructions Manual Download Page 3

IMPORTANT SAFETY INFORMATION FOR BUNK BED:

 

1.   Follow the information on the WARNINGS appearing on the upper bunk end structure and on the 

 

   carton. DO NOT REMOVE WARNING LABEL FROM BED.

 

2.  Always use the specified size mattress or mattress support, or both to help prevent the likelihood   

 

   of entrapment or falls.

 

3.  Surface of mattress must be at least 5 inches below the upper edge of guardrails on top bunk. 

 

4.  Do not allow children under 6 years of age to use the upper bunk. 

 

5.  Prohibit more than one person on upper bunk. 

 

6.  Periodically check and ensure that the guardrails, ladder, and other components are in their  

 

 

   proper position, free from damage, and that all connectors are tight.

 

7.  Do not allow horseplay on or under the bed and prohibit jumping on the bed.

 

8.  Always use the ladder for entering and leaving the upper bunk.

 

9.  Do not use substitute parts. Contact Restoration Hardware for replacement parts 

 

10. Use of a night light may provide added safety precaution for a child using the upper bunk. 

 

11.  Use guardrails on both sides of the upper bunk.

 

12. If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed 

 

   should be placed against the wall to prevent entrapment between the bed and the wall.

 

13. The use of water flotation  mattresses is prohibited.

 

14. STRANGULATION HAZARD - Never attach or hang items to any part of the bunk bed that are

 

   not designed for use with the bed: for example, but not limited to, hooks, belts, and jump ropes.

 

15. Keep these instructions for future reference.

Page 3 of 13

C A L L U M   S T O R A G E   T W I N   B U N K

Summary of Contents for 355-80














Reviews: