manualshive.com logo in svg

RH Baby&child Thayer Crib, Assembly Instructions Manual

Share
Download
RH Baby&child Thayer Crib Assembly Instructions Manual Download Page 8

STEP 3

MATTRESS SUPPORT ASSEMBLY

STEP 3.1

Attach the support arms to the mattress support, using allen

bolts (BB), lock washers and plain washers. See 

DETAIL E

.

STEP 3.2

Hang the mattress support on both end panels using allen

bolts (BB), lock washers and plain washers. See 

DETAIL F

.

WARNING:

Set the mattress support to the desired height by adjusting

the support arms. The mattress support should be at it's

highest setting for newborns, then adjusted to the lower

positions as the child grows and becomes mobile. Once the

child is able to stand, the mattress support should be at its

lowest position.

After assembly, re-tighten all bolts to a snug fit. DO NOT

OVER TIGHTEN.

HARDWARE NEEDED FOR STEP 3

(BB) 1/4" x 13/16 " Allen Bolt  = 8 pcs

Lock Washer 1/4"  = 8 pcs

Plain Washer 1/4"  = 8 pcs

Allen Wrench = 1 pc

Support Arm = 4 pcs

8/11

E

F

(BB)

DETAIL E

DETAIL F

(BB)

Support arm

Summary of Contents for Thayer Crib












Reviews:

No comments

Brands by name

Popular brands

Load more brands