Page 7
STEP #2
MATTRESS SUPPORT ASSEMBLY
STEP #2.1:
Attach the support arms to the mattress support, using Allen bolts
(BB) with lock washers and plain washers. See
DETAIL B
.
STEP #2.2:
Hang the mattress support on both end panels by using Allen bolts
(BB), lock washers and plain washers, as per illustration in
DETAIL C
.
WARNING
:
Set the mattress support to the desired height by adjusting the
support arms. The mattress support should be at its highest setting
for newborns, then adjusted to the lower positions as the child grows
and becomes mobile. Once the child is able to stand, the mattress
support should be at its lowest position.
HARDWARE NEEDED FOR STEP #2:
(BB) 1/4" x 13/16 " BOLT = 8 pcs
Lock Washer = 8 pcs
Plain Washer = 8 pcs
Allen Wrench = 1 pc
Support Arm = 4 pcs
B
Support Arm
(BB)
DETAIL B
C
(BB)
DETAIL C
