Page 9 of 9
CARVER UPHOLSTERED BUNK BED (RIGHT LADDER) – ASSEMBLY INSTRUCTIONS
Model No: 0943 - 2/4
STEP 6:
INSTALL MATTRESS
UPPER BUNK MATTRESS DIAGRAM
MATTRESS
MATTRESS SPECIFICATIONS FOR TOP BUNK:
The following size mattress and foundation are specified for use with this bunk bed:
MATTRESS DIMENSION SPECIFICATIONS FOR TOP BUNK
Twin-Over-Twin bunk: 75" long x 38" wide x 6" high
Full-Over-Full bunk: 75" long x 53" wide x 6" high
MATTRESS DIMENSION SPECIFICATIONS FOR LOWER BUNK
Twin-Over-Twin bunk: 75" long x 38" wide x 10" high
Full-Over-Full bunk: 75" long x 53" wide x 10" high
PLATFORM :
- Twin-Over-Twin bunk: Upper bed consists of 2 platform pieces 37 3/4" long x 38 3/4" wide x 3/4" high and bottom bed consists of
14 slats 38 3/4" long x 2 1/2" wide x 3/4" high.
- Full-Over-Full Bunk: Upper bed consists of 2 platform pieces 37 3/4" long x 53 7/8" wide x 3/4" high and bottom bed consists of
14 slats 53 7/8" long x 2 1/2" wide x 3/4" high.
**Note: MATTRESS THICKNESS MUST NOT EXCEED 6" HEIGHT FOR TOP BUNK.
Be sure to adhere to these MATTRESS SPECIFICATIONS in order to avoid the possibility of falling or entrapment.
THESE SPECIFICATIONS MUST BE STRICTLY ADHERED TO!
5" MINIMUM DISTANCE
FROM TOP OF MATTRESS
TO TOP OF GUARD RAIL
6" MAXIMUM
THICKNESS
SIDE RAIL
PLATFORM
CARE INSTRUCTIONS
Dust often using a clean, soft, dry, lint-free cloth.
Blot spills immediately, and wipe with a clean, damp cloth.
We do not recommend the use of chemical cleansers, abrasives, or furniture polish as they might damage the lacquered finish.
