Page 5 of 10
CALLUM FULL LOFT BED – ASSEMBLY INSTRUCTIONS
BUNK BED END ASSEMBLY INSTRUCTIONS
STEP 1:
STEP 2:
NOTE: Each side rail needs 2 people to assembly, put the bunk bed end panel on a straight line, insert the side rail on end
panel at the same time and set up hardware to assembly but not fully tighten, set up another side rail & hardware,
then tighten them.
1
c
2
3
5
F
C
C
Secure the Threaded Rod (1) into the Bunk Bed End (A).
1
Raise the
Front/Back Guard Rails (C) and Bottom Side Rail (F)
up and place the rod into the Bunk Bed Ends (A) at the bore
holes’ position.
Insert Curved Slotted Washer (2), Hex Nuts (3) and tighten
with Wrench (5).
CORRECT
INCORRECT
