6/15
STEP 1
FULLY REMOVE THE DRAWERS AND BOTTOM PANEL OF THE STORAGE
SIDE PANELS AND STORAGE ASSEMBLY
STEP 1.1
Fully remove all the drawers out of the storage.
Please see detail on page 13 to remove drawer.
See
DETAIL A
.
STEP 1.2
Unscrew all screws on the bottom panel and fully
remove the bottom panel from storage. See
DETAIL B
.
STEP 1.3
Align the locator pins on the end of the storage to
the corresponding holes in the side rail panel (left),
insert the side rail panel into the storage.
STEP 1.4
Attach the side rail panel to the storage by using
Allen bolts (CC) with the lock washers and plain
washers. See
DETAIL C
.
STEP 1.5
Repeat above procedure to attach the side rail
panel (right) to the storage.
HARDWARE NEEDED FOR STEP 1
(CC) 1/4" x 1 3/8" Allen Bolt = 8 pcs
Lock Washers = 8 pcs
Plain Washers = 8 pcs
Allen Wrench = 1 pc
B
DETAIL B
DETAIL A
DETAIL C
C
(AA)
Summary of Contents for BENNET
Page 1: ...1 1 1 15...
