RH Baby&child BELLINA STORAGE CONVERSION CRIB Assembly Instructions Manual Download Page 3

Page: 3 / 11

IMPORTANT SAFETY INFORMATION FOR CRIBS

CAUTION:

ANY MATTRESS USED IN THIS CRIB SHALL BE

AT LEAST 27 1/4" X 51 5/8" WITH A THICKNESS

NOT EXCEEDING 6".

WARNING

Do not use this crib if you cannot exactly follow the instructions
provided.

Do not use this crib for a child who can climb out of it or who is

taller than 35" (89cm).

Do not place in or near the crib any cord, strap or similar item that

could become wrapped around a child's neck.

Do not place this crib near a window or patio door where a child

could reach the cord of a blind or curtain and the strangled.

Check this crib regularly before using it, and do not use if any part

is loose or missing or if there are any signs of damage.

Do not substitute parts. Contact the manufacturer if replacement
parts or additional instructions are needed.

Children can suffocate on soft bedding. Do not place pillows,
comforters or soft mattresses in this crib.

Use a mattress that is no thicker than 15cm in height and, when it
is pushed firmly against any side of this crib, it does not leave a

gap of more than 3cm between the mattress and any part of any
other side of the crib.

3/11

Summary of Contents for BELLINA STORAGE CONVERSION CRIB











