RH Baby&child AVALON STORAGE BUNK BED FULL OVER FULL Assembly Instructions Manual Download Page 2

IMPORTANT SAFETY INFORMATION FOR BUNK BED

1. Follow the information on the WARNINGS appearing on the upper bunk end

structure and on the carton.

2. Always use the specified size mattress, mattress support, or both to help

prevent the likelihood of entrapment or falls.

3. Surface of mattress must be at least 5 inches below the upper edge of

guardrails on top bunk.

4. Do not allow children under 6 years of age to use the upper bunk.

5. Prohibit more than one person on upper bunk.

6. Periodically check and ensure that the guardrails, ladder, and other

components are in their proper position, free from

damage, and that all connectors are tight.

7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.

8. Always use the ladder for entering and leaving the upper bunk.

9. Do not use substitute parts. Contact Restoration Hardware for replacement

parts.

10.Use of a night light may provide added safety precaution for a child using

the upper bunk.

11.Use guardrails on both sides of the upper bunk.

12.If the bunk bed will be placed next to a wall, the guardrail that runs the full

length of the bed should be placed against the wall to prevent entrapment
between the bed and the wall.

13. The use of water flotation mattress is prohibited.

14.STRANGULATION HAZARD - Never attach or hang items to any part of the

bunk bed that are not designed for use with the bed: for example, but not
limited to, hooks, belts, and jump ropes

15.Keep these instructions for future reference.

16.DO NOT remove warning label from bed.

A V A L O N   S T O R A G E   B U N K   B E D   F U L L   O V E R   F U L L   -   A S S E M B L Y   I N S T R U C T I O N S

2 8

/

Summary of Contents for AVALON STORAGE BUNK BED FULL OVER FULL









Reviews: