STEP #4
INSTALLATION OF STABILIZER RAILS
INTO THE END PANEL
DETAIL H
(CC)
DETAIL I
STEP #4.1
On inside face of both end panels are pre-installed metal
brackets, designed to hold the stabilizer rails. Set both ends
of the stabilizer rails into brackets, as illustrated in
DETAIL H.
STEP #4.2
Once the stabilizer rails are set, hold the mattress support
and lay down the toddler bed then fasten the stabilizer rails
with bolt, with plain washer and lock washer. See
DETAIL I
.
NOTE
After assembly, re-tighten all bolts to a snug fit.
Page 7 of 7
