RH Baby&child ALEXANDRA TUFTED TODDLER Instructions Manual Download Page 1

Made in Vietnam

Distributed in the U.S.A. by:

Restoration Hardware Baby & Child

10640 Harrel St. Suite B

Mira Loma, CA 91752

www.rhbabyandchild.com

Distributed in Canada by:

Restoration Hardware Canada, Inc.

1500-1055 West Georgia Street

Vancouver, British Columbia V6E4N7

CUSTOMER SERVICE

If you are missing parts or have any questions about this product, contact us first. You can also order parts by writing to the address above. Include the

product model number, color, and a brief description of the part. Call 1-800-762-1751.

C

ARE AND CLEANING

DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning. Dust often using a clean, soft, dry cloth. Blot spills immediately and wipe

with a clean damp cloth. If the crib is to be stored, store in a cool dry place and carefully package all original hardware to protect from loss.

TOOLS AND INSTALLATION

Tools Necessary: Allen Key (included)

NOTE: It may be easier to assemble product with two people.

NOTE: When inserting bolts, turn clockwise until tight. Then loosen 

1

2

 - 

3

4

  of a turn. After crib is

completely assembled, return to each bolt and tighten. Use wax or soap on all bolts to facilitate assembly

WARNING: Read all instructions before

assembling this product. KEEP
INSTRUCTIONS FOR FUTURE USE.

Page  1  of  7

Summary of Contents for ALEXANDRA TUFTED TODDLER








Reviews: