RHBABY&CHILD
Tanner Conversion Crib
STEP 7:
The crib can be converted to a full size bed. Using the Headboard (A), attach a full size bed frame (sold
separately) at the location shown. Insert the Flat Washer (9) and Small Lock Washer (8) onto the Allen Bolt (7) and
tighten using Small Allen Key (10).
When converting the toddler bed to a full-size bed, insert the Bolt (12) into highest hole on Headboard (A) from
the back, locate the Wood Cover (11) at the highest hole on front of the Headboard (A), screw the Bolt (12) into
the Wood Cover (11) with a screwdriver (not included), hold the Wood Cover (11) and make sure its two edges are
always paralleled with the headboard post edges during tightening the bolt.
IMPORTANT:
Store away all extra parts to this crib/toddler bed for possible future use as you may wish to convert again.
Always store the assembly directions in the pouch attached to the mattress platform.
(12) ¾2"x2¼• Bolt= 2 pcs
€B
@\\-1
(11) Wood Cover = 2 pcs
(8) Small Lock Washer = 4 pcs
(9) Flat Washer = 4 pcs
@�
(7) ¼"x1 • Allen Bolt= 4 pcs
@ [�
(10) Small Allen Key = 1 pc
Page 11 of 11
I - - -
-
- 7
- - - - - - - - - - - - - - - J
V2.1
