RH Baby&child 1088 - 9/10 Assembly Instructions Manual Download Page 4

Page 4 of 12

KAYSE CRIB/TODDLER BED

 KIT – ASSEMBLY INSTRUCTIONS

Model No: 1088 - 9/10

Infants have died in toddler beds from entrapment and strangulation.

Failure to follow these warnings and the assembly instructions could 

result in serious injury or death.

NEVER use bed with children under 15 months.

NEVER place bed near windows where cords from blinds or drapes 

may strangle a child.

The mattress intended for use on the bed must be a full-size crib mattress 
having minimum dimensions of 51 5/8 inches (1310 mm) in length, 27 1/4 
inches (690 mm) in width and 4 inches (100 mm) in thickness, not 
exceeding 6 inches (152 mm) in thickness.
If guard rails are used as the mattress containment means, the guard rail(s) 
provided must be used to avoid the formation of a gap between the 
mattress and the bed, which could cause an entrapment.
DO NOT place bed near windows where cords from blinds or drapes 
may strangle a child.
DO NOT place items with a string, cord, or ribbon around a child's neck, 
such as hood strings or pacifier cords.
A child using the toddler or day bed must be at least 15 months of age 
and weigh 50 lbs (22.7 kg) or less.

     WARNING: ENTRAPMENT/STRANGULATION HAZARD

Summary of Contents for 1088 - 9/10













Reviews: