After the 4 corners are set and the ground posts are level and plumb, you are now
ready to install the remaining ground posts. The ground posts are most commonly
located 4’ on center
, but post spacing may be different if you purchased a
greenhouse with ei
ther 2’, 3’ or 6’ bow spacing. Using your long 100’ tape, measure
and mark the locations of each ground post on the string lines.
Tip: Alternatives to using the ground post driver include the following. You can
purchase a metal fence post driver from a hardware store or fence company.
These are useful when driving in taller ground posts that are 6 ft. or higher and
cost around $40. You can also rent or buy a gas-powered post driver which is the
most efficient way to install ground posts.
Summary of Contents for Nor' Easter 20-11
