22
23
User Manual | rgnt-motorcycles.com
Step 3. Steering lock (If used)
• If the steering lock is enabled, insert the key in the lock and turn it 45 degrees counter clockwise to
release the steering lock.
Step 4. Controls
• Sit on the motorcycle, adjust the controls to suit you and make yourself comfortable. Set the
mirrors so that you have a good view of what is happening around you. Test all brakes and check
the brake fluid level. Find more info on how to do a “Safety Brake Control Check” in Chapter 11.
Confirm that all lights are functional. Confirm that the battery has sufficient power to get you to
your destination.
Step 5. Start to drive
• Turn the kill switch button to “N” Neutral. The current mode will show on the display.
• Pull up the side stand
• Hold any brake and push the ignition button for 3 seconds. This will put the vehicle into Drive. The
“N” (neutral) logo will change into “D” (drive) in the display.
• Release the brake and start riding. Softly give throttle to accelerate.
Step
6
. Enjoy your electric RGNT Motorcycle and have a nice ride!
NOTE!
Drive mode RANGE / POWER
How to switch the drive mode from “Range” to “Power” Make sure the bike is in “D” Drive mode in the
display. Push the “ignition” button for 1 second.
This will change the drive mode from “Power” to “Range. Press again to switch back.
•
Power Mode 100% power
•
Range Mode 80% Power