20
21
User Manual | rgnt-motorcycles.com
11. Safety Checkpoints
11.1. Safety checkpoints before you ride
Safety first! Before driving any motorcycle including the RGNT Electric Motorcycle we recommend you
to perform a quick safety check of the motorcycle. By completing this checkpoint list you secure that
the motorcycle is in good condition before each time you drive.
Checkpoints before each ride:
Tires
• Control that the tires have a good pattern depth.
NOTE! Depth regulation depends on each country. Our recommendation is a minimum of 1,5 mm
pattern depth.
• Check tire pressure. The tire pressure info sticker is located on the left swing arm on the
motorcycle.
Brake lines
• Perform a quick visual inspection of the brake lines and look for oil leaks.
WARNING! If leak is detected DO NOT USE MOTORCYCLE. Contact a RGNT Service Center.
Lights
• Check that indicators are working by switching the indicator button Left and Right.
• Do a visual control that all indicators are working.
• Check that the brake light is working by pressing the left or right brake lever, and make sure that
the rear light lights up.
• Check that the main headlight is working by switching all 3 light modes and do a visual control.
• Check that the hazard button and light are working properly alla indicators should flash
simultaneously.
CBS Brakes
• Check that the brake levers are working. Slowly Press Left and Right brake handle. There should
be a resistant feeling and both brake handles should stop before reaching the handlebar.
WARNING! If you can press both brake handles all the way to the handlebar DO NOT USE
MOTORCYCLE. Contact a RGNT Service Center.
Now you are ready to enjoy the RGNT Electric Motorcycle for a safe ride!
